Ford PATS System Radio/Stereo Installation Instructions

For the 1999 model yr, all Ford Motor Company automobiles outfitted with the passive anti theft system can be utilizing the PATS II system. The PATS II system was introduced on roughly half of the PATS equipped automobiles for the 1998 model year. The other half of the PATS equipped vehicles for the 1998 model yr had been geared up with the PATS I system. Many 2000 and later Ford Vehicles Use the E-PATS system, which uses an encrypted transponder in the key.
Most Ford automobiles come manufacturing facility-put in with the Ford PATS system radio. This radio comes with an anti-theft feature that stops thieves from utilizing your radio when removing it from your car or when disconnecting your battery. Chances are you’ll decide to put in a Ford PATS system after you purchase your vehicle. As a substitute of spending cash to take it to knowledgeable, you possibly can install the radio into your automotive by yourself.
1. Unplug the damaging battery cable from the damaging battery terminal. Use the 10-mm wrench to loosen the bolt on the cable’s clamp. Take away the cable from the adverse lead post.
2. Connect the stereo wiring to the harness adapter. You will see that a label that reveals you the place to make the suitable connections.
3. Push the Ford radio faceplate adapter into the stereo mounting dock. Pull the wiring harness adapter into the front of the adapter.
4. Attach the plugs of the wiring harness adapter within the retailers on back of the radio. Push the radio into the opening of the mounting dock.
5. Connect the destructive battery clamp across the adverse lead publish of the battery. Use the wrench to tighten and prevent the clamp from shifting freely.